MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
WEIGHT: 760 Grams MATERIAL: STAINLESS STEEL LOWER DIAMETER: 70 mm HIGHER DIAMETER: 28 mm HEIGHT: 20 mm
Rubber Turntable Mat Diameter: 298mm Thickness: 3mm
There have been a broom since the early 70s and do their job sometimes well but less well. A commonly observed phenomenon is the so-called “storm”, or “skating”, the broom arm towards the center of the plate without running synchronously with the sampling needle. The latest developments therefore also consistently rely on measures that prevent exactly that. With the highly effective neodymium magnet a material has been available for quite some time, which can be used right here. Sweep it S2 was developed in collaboration with Klaus Mick and uses its patented principle to magnetically stabilize the broom An intensive research and development of technical and physical properties and empirical experimental arrangements have led to the product that you hold straight in your hands.
NEW CONNOISSEUR BD-1, BD-2, BD-2/A, BD-2/AR, BD-3 Round Turntable Belt. Top Quality, Long Lasting and Hard to find, RBS32.2 x 0.070″
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.75 Inch / 40cm Inside Circumference (total length)
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 20.7 Inch / 52.6cm Inside Circumference (total length)
Turntable and phonograph record player Belt 21.4″
The 1022GX cartridge is recommended for the discerning listener as it uses a vital-shank, nude, diamond stylus. This polyhedral, line-contact diamond profile was chosen because it has a very low tip-mass and a large contact area whilst being very narrow from front to back, even enabling the undistorted retrieval of ultrasonic frequencies in a recording. A large contact area means that stylus and record wear are reduced and because it plays lower down in the groove than spherical types, older records may well gain a new lease of life.
Makes Cartridge Set-Up A Breeze, Allowing You To Quickly And Properly Align Your Cartridge
Tool for cartridge alignment and adjustment
Special slip-proof tool for defining the turning centre of Pro-Ject tonearms
Adaptable to accommodate differing tonearm lengths
Also suitable for other manufacturers’ tonearms
Suitable for tonearms between 8″ (203mm) and 12″(305mm) effective length
Main features Produces a well balanced and solid sound. Generates a broad, smooth sound with a musical audio response and 3D audio image, similar to the specification of the genuine Shure M44G cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 6 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
Replacement needles N44G DJ Improved is attached to this cartridge Made in Japan
High quality Elliptical cartridge made by Grado
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
High quality Conical needle made by Tonar
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 2,0 grams tracking pressure
Orders shipped within 24 hours
0.2 X 0.7 mil Diamond Elliptical tip needle, 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
$ 49.99
Black
Normarh, Ortofon
Elliptical
no
LM-10, LM10, OM-PRO, OMPRO, STD
1,5 – 2,5 grams
4541-DE, 759-DE
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
0.4 X 0.7 mil Diamond elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5,0 grams tracking pressure