MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
The Measure it Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.
Connects to Turntable Output to ing Phono Level Up to Line Level12V DC Adaptor Included Load Impedance: 10K Ohms Reference Voltage: 1V Input Sensitivity / Impedance/PHONO 3 mV / 50K Ohms T.H.D. : 0.08 for 1 KHz 3 mV Input Output Level;2V S/N Ratio (with A-WTD);70 dB Frequency Response:20 Hz ~ 20 KHz ±2dB Dimensions (WHD):3.54″x2.13″ x1.02″ Weight : 0.88 Lbs Features Connects to Turntable Output to Bring Phono Level Up to Line Level – 12V DC 110V Adaptor Included Load Impedance: 10K Ohms – Reference Voltage: 1V d Input Sensitivity/Impedance/PHONO 3 mV / 50K Ohms – T.H.D: 0.08 for 1 KHz 3 mV Input – Output Level: 2V S/N Ratio (A-WTD): 70 dB – Frequency Response: 20 Hz ~ 20 KHz ±2dB Dimensions: (W)3.54″x (H)2.13″ x (D)1.02″ – Weight: 0.88 Lbs Connects to turntable Input Sensitivity: 3mV at 50K Ohms (phono) Output: 2V max (P-P) at 10K Ohms Includes power adapter 12V DC THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB | Frequency Response: 20Hz to 20KHz @ 2dB
This universal 1/2″-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.
Cleans records as you play. Unlike a handheld cleaning brush, this does require a small amount of setup. Instructions are included and installation time is around 5-10 minutes. The earth wire dissipates static as the record plays, via the fine record brush fibre.
NEW Genuine Pro-Ject 2Xperience Replacement Drive Belt
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
New Highest quality turntable belt, 38.8″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
Tetrad Factory part numbers would include ranges from A0 thru A4 B0 thru B4 C0 thru C4 Phonograph cartridge Pfanstiehl P-409D, with M853-DS77 stylus and needle guard, universal Tetrad replacement for all Tetrad Cartridges having blue connector socket, and needle stamped with any of the following: 50, 51, 52, 53, 54, 60, 61, 62, 63, 64, A0-A4; B0-B4; C0-C4; T5HD most popular stamp on needle handle is T5HD most popular stamp on cartridge socket is TC8HO or TC8H0
Excellent quality at a reasonable price. Includes both cartridge and stylus. Cartridge is 1/2″ headshell mountable; the stylus has a 0.6mm spherical diamond tip. Cartridge has a tracking force of 2.5g to 3.5g. Channel separation is 26dB at 1kHz. Output: 2.4Mv. Features: 0.6mm spherical diamond tip Tracking force: 2.5g to 3.5g Channel separation: 26dB at 1kHz Output: 2.4Mv
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell.
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5- 2,5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
Tip: Hyper Elliptical Stylus
Cartridge Number: V15TYPE4, V154-G
Jico Number: E007447
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,25 grams tracking pressure
Orders shipped within 24 hours
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure
$ 32.95
Brown
Normarh, Audio Empire, Fisher, Pfanstiehl, Sanyo, Toshiba
Conical
no
105LT, 205LT, C-50C, C-50M, C-51C, C-51M, C50C, C50M, C51C, C51M, MG-29, MG-29G, MG-55D, MG-57, MG29, MG29G, MG55D, MG57, N-15 C, N-50, N15C, N50, S-205, S206, ST-29D, ST29D, ST29G, ST55D, ST57D, V-51, V51
16, 33, 45
540-D
1,0 – 3,0 grams
Replacement JNP500 stylus with spherical tip and aluminium alloy cantilever. Cantilever: Boron Stylus: Line contact naked block diamond stylus tip
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm
Universal Replacement Stylus For 750 Stanton Cartridges
Replacement JNP150 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip