MON COMPTE
LISTE D’ENVIES
LISTE COMPARÉE
Salut.
Username*
Password*
Lost password?
Email*
The AT-LH18H is a 18-gram universal ½”-mount headshell, optimized to accommodate 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws, plastic washers, and a hexagonal wrench.
The cartridge is also available in 13-gram (AT-LH13H) and 15-gram (AT-LH15H) models for optimal compatibility with your cartridge/tonearm requirements.
The AT-PEQ30 phono equalizer is designed specifically to add a phono stage to a turntable setup or to upgrade a turntable’s built-in phono preamplifier.
It is compatible with turntables with MM (moving magnet) and MC (moving coil) cartridges. The AT-PEQ30 benefits from Audio-Technica’s years of analog audio expertise and uses the finest quality parts in a layout that is optimized for low noise and minimum distortion.
turntable cleaner vinyl records spray
The lightweight aluminum AT-HS10SV is a universal ½”-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record. The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws
Original Standard Thorens TD124 replacement belt made of a special rubber compound.
Brand New turntable beltThis is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 25.0 Inch / 63.5cm Inside Circumference (total length)
New high quality super elasticity rubber drive belt 24″ long x 0.20″ width x 0.02″ thick ( 610mm long x 5mm width x 0.5mm thick) Can replace all 24″ to 27″ belts, Perfect replacement or belt, specs equal or exceed original standards.
High quality Elliptical cartridge made by Grado
Numark Groove Tool Cartridge & Stylus Mounted on a Numark HS1 Headshell
Excellent quality at a reasonable price. Includes cartridge, stylus and Headshell. The stylus has a 0.6mm spherical diamond tip. Cartridge has a tracking force of 2.5g to 3.5g. Channel separation is 26dB at 1kHz. Output: 2.4Mv.
The Nagaoka MP-150H MM phonograph cartridge offers superior clarity, detail and dynamic contrast.
Features: Superfine polished special elliptical diamond stylus Powerful samarium cobalt magnet Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity Carbon fibre reinforced plastic Body
Specifications: Type: Moving Magnet Cantilever: Hardened, low-mass tapered aluminum alloy Stylus type: Superfine elliptical bonded diamond with 0.4 x 0.7 mil Cartridge weight: 6.5 g Head shell’s weight: 9.5 g Output voltage @ 1kHz,5cm/sec: 4.5mV Frequency response: 20Hz-20kHz Channel balance @ 1kHz: > 1.5dB Channel separation @ 1kHz: > 24dB Recommended loading: 47k ohms Dynamic compliance: 6.0 x 10-6 cm/dyne Static compliance: 18 x 10-6 cm/dyne Tracking force range: 1.5 – 2.0 g Stylus replacement: Nagaoka JN-P150
The AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 2,0 grams tracking pressure
High quality Conical needle made by Tonar
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2,5 grams tracking pressure
Commandes expédiées en 24 heures
0.7 mil Diamond conical tip needle ,for 78rpm , 3,0 – 5.0 grams tracking pressure
$ 32.95
Normarh, Pfansthiel
Red
78 RPM
Conical
3,0 – 5.0 grams
no
691-D2
Il n’y a pas encore d’avis.
Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *
Votre avis *
Nom *
E-mail *
Audio-Technica ATN3600L stylus specified for AT3600 cartridges, Special conical diamond tip for good fidelity ,0.6 mil Diamond Conical needle , 3 – 4 grams tracking pressure
Replacement JNP150 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Audio Technica VMN20EBstylus specified for VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,25 grams tracking pressure
Avis
Il n’y a pas encore d’avis.