MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
Carbon Fiber Turntable Mat Dia. 295mm, Thickness 2mm
Universal Ground Wire for Turntables, Amplifiers, Speakers, etc.
Since many modern amplifiers no longer have a dedicated phono input, the phono box mm from Pro-Ject is the perfect addition to your turntable setup. Compatible with nearly any moving magnet cartridge, the phono box mm gives you a superb audiophile music experience at an entry-level price. The utilization of advanced circuitry keeps noise and distortion extremely low, and the metallic case and outboard DC power supply keeps the unit free from electromagnetic interference. Since it’s only slightly larger than a pack of playing cards, the phono box mm can be placed nearly anywhere. The RCA input and output sockets are gold-plated to preserve sound quality and can be connected directly to any line-level input (aux, CD, Etc.) on your amplifier.
The lightweight aluminum AT-HS10BK is a universal ½”-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record. The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws
New Highest quality turntable belt, 16.9″/40,64 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.030″/ 0,076 Thick Turntable Belt
New Highest quality turntable belt, 27.3″/69,34 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.024″/ 0,060 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.2 Inch / 38.1cm Inside Circumference (total length)
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. Size : 23.6″ by 0.200″ wide
High quality Elliptical cartridge made by Grado
The Nagaoka MP-500H MM phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend – the Nagaoka MP-500 phonograph cartridge – the master of the grooves.
Features: Exclusive super rigid body for ultra resonance and superb fidelity Superfine line contact diamond stylus Powerful samarium cobalt magnet Low-mass, high strength boron cantilever Carbon fibre reinforced plastic body
Specifications: Type: Moving magnet Cantilever: High-strength Boron Stylus type: Superfine line contact diamond Cartridge weight: 8.0 g Head shell’s weight: 13.5 g Output voltage @ 1kHz,5cm/sec: 3mV Frequency response: 20Hz-25kHz Channel balance @ 1kHz: > 1dB Channel separation @ 1kHz: > 27dB Recommended loading: 47k ohms Dynamic compliance: 8.5 x 10-6 cm/dyne Tracking force range: 1.3 – 1.8 g Stylus replacement: Nagaoka JN-P500
Main features Provides a lively, vigorous, and dynamic sound. Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter Glow in the dark
N-44-7 CLUB Improved is attached to this cartridge Made in Japan
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 2.5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 2,0 grams tracking pressure
0.4 X 0.7 mil Diamond elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 3,0 grams tracking pressure
Orders shipped within 24 hours